Kaduna Polytechnic (KADPOLY) is a Federal Polytechnic located at Kaduna State. If you’re planning to study at Kaduna Polytechnic, having the right knowledge about the available courses is a vital step in guiding your admission journey. Below is the comprehensive list of diploma courses offered at the Kaduna Polytechnic (KADPOLY). Alongside the courses, you will also find details on the required O’Level subjects and JAMB subject combinations to help you prepare effectively for admission.
Here is the list of courses offered at Kaduna Polytechnic; simply CLICK on your preferred course to view the departmental requirements and other relevant information.
1. AccountancyAccountancy trains students in financial reporting, auditing, and taxation to support business operations and ensure regulatory compliance… |
Accountancy
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Accountancy course admission requirements at the undergraduate level:
Furthermore, candidates aspiring to gain admission into Accountancy department under Faculty of Administration, should at least obtain five (5) credit (C5 and above) passes in their SSCE subjects including:
Economics and any other two (2) relevant subjects.
For NBC holders, the other two (2) relevant subjects could be from any of
Principles of Accounts, Commerce, Office Practice and Secretarial Duties.
|
2. Agricultural and Bio-Environmental Engineering Tech.Agricultural and Bio-Environmental Engineering Technology applies engineering solutions to agriculture, irrigation, waste management, and environmental protection… |
Agricultural and Bio-Environmental Engineering Tech.
Applicants must carefully assess the requirements of their Diploma program and work with academic advisors to adapt their course schedules in order to be admitted to Kaduna Polytechnic (KADPOLY). Some common components that are usually included in prerequisites for undergraduate Agricultural and Bio-Environmental Engineering Tech. courses are as follows:
Additionally, the minimum requirement for applicants seeking admission to the Agricultural and Bio-Environmental Engineering Tech. department under Faculty of Engineering / Technology, is five (5) credits (C5 and higher) in their SSCE subjects, including the following:
any three of the following:
Biology/Agricultural Science, Chemistry, Technical Drawing Basic Electronics/Basic Electricity, Auto Mechanics, Metal Work, Further Mathematics, Food and Nutrition and Geography.
At least passes in Chemistry, Biology/Agricultural Science/Food
|
3. Agricultural TechnologyAgricultural Technology applies modern tools, biotechnology, and machinery to enhance farm operations, food production, and processing… |
Agricultural Technology
To get into Kaduna Polytechnic (KADPOLY), applicants must carefully consider the criteria of their Diploma program and collaborate with academic advisors to modify their course schedules. The following are some typical elements that are typically included in prerequisites for undergraduate Agricultural Technology courses:
Additionally, candidates seeking admission into the Agricultural Technology department under Faculty of Agriculture, must have at least five (5) credits (C5 and more) in their SSCE disciplines, including the following:
Biology / Agricultural Science,
Mathematics, Chemistry and
Geography, Food and Nutrition, Economics,
Technical Drawing, Physics, Nigerian Language and Home Economics.
|
4. Architectural TechnologyArchitectural Technology integrates technical drawing, construction science, and design theory to support architectural development and structural planning… |
Architectural Technology
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Architectural Technology course admission requirements at the undergraduate level:
Moreover, candidates aspiring to gain admission into Architectural Technology department under Faculty of Built Environment, should at least obtain five (5) credit (C5 and above) passes in their SSCE subjects including:
Biology, Fine Art, Chemistry, History, English Language, Geography, Further Mathematics, Economics / Commerce, Religious Knowledge, Technical Drawing and Business Method.
At least a pass in Fine Art or Technical Drawing.
|
5. Banking and FinanceBanking and Finance (BF) provides knowledge of financial systems, banking operations, and investment management essential for economic growth… |
Banking and Finance
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Banking and Finance course admission requirements at the undergraduate level:
Furthermore, a minimum of five (5) credit passes (C5 and higher) in their SSCE subjects, including the following, are required for applicants to the Banking and Finance department under Faculty of Administration.
English Language (not Literature in English)
two (2) other relevant subjects.
|
6. Building TechnologyBuilding Technology (BT) covers building design, materials science, and construction management for careers in the construction industry… |
Building Technology
To get into Kaduna Polytechnic (KADPOLY), applicants must carefully consider the criteria of their Diploma program and collaborate with academic advisors to modify their course schedules. The following are some typical elements that are typically included in prerequisites for undergraduate Building Technology courses:
Furthermore, the minimum requirement for applicants seeking admission to the Building Technology department under Faculty of Engineering / Technology, is five (5) credits (C5 and higher) in their SSCE subjects, including the following:
Geography, Economics, Arts and Technical drawing.
For holders of NTC, the other relevant subjects could be; Intro. to Building Construction, Bricklaying, Concreting, Walls, Floors and Ceiling Finishing, Building / Engineering Drawing, Joinery, Carpentry, Gas, Steam Work and Bronze Welding, Cold / Hot Water Supply, Sanitation and Drainage.
|
7. Business Administration and ManagementBusiness Administration and Management (BAM) equips students with managerial, leadership, and financial skills for effective organizational performance… |
Business Administration and Management
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Business Administration and Management course admission requirements at the undergraduate level:
Furthermore, candidates aspiring to gain admission into Business Administration and Management department under Faculty of Administration, should at least obtain five (5) credit (C5 and above) passes in their SSCE subjects including:
English Language (not Literature in English)
Any three subjects from the following: Economics / Commerce, Business Methods, Principles of Accounts, Literature in English, Geography, Office Practice, Biology / Agricultural Science, Chemistry, Physics, History / Government, Typewriting, and Shorthand
|
8. Chemical Engineering TechnologyChemical Engineering Technology provides practical knowledge in process design and chemical systems operation for industrial manufacturing… |
Chemical Engineering Technology
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Chemical Engineering Technology course admission requirements at the undergraduate level:
Furthermore, candidates aspiring to gain admission into Chemical Engineering Technology department under Faculty of Engineering / Technology, should at least obtain five (5) credit (C5 and above) passes in their SSCE subjects including:
Biology/Agricultural Science, Technical Drawing, Basic Electronics/Basic Electricity, Auto Mechanics, Metal Work, Woodwork (for Civil Engineering Tech.), Further Mathematics, Geography and Economics / Commerce.
For Marine Engineering and Industrial Safety & Environmental Engineering a pass in Biology is required.
|
9. Civil Engineering TechnologyCivil Engineering Technology emphasizes the practical application of civil engineering principles, including construction methods, structural design, and site development… |
Civil Engineering Technology
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Civil Engineering Technology course admission requirements at the undergraduate level:
Additionally, a minimum of five (5) credit passes (C5 and higher) in their SSCE subjects, including the following, are required for applicants to the Civil Engineering Technology department under Faculty of Engineering / Technology.
any one other subject from:
Biology/Agricultural Science, Technical Drawing, Basic Electronics/Basic Electricity, Auto Mechanics, Metal Work, Woodwork (for Civil Engineering Tech.), Further Mathematics, English Language, Geography and Economics/Commerce.
For Marine Engineering and Industrial Safety & Environmental Engineering a pass in Biology is required.
|
10. Computer EngineeringComputer Engineering focuses on designing, developing, and maintaining computer hardware and software for automation, robotics, networking, and digital systems… |
Computer Engineering
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Computer Engineering course admission requirements at the undergraduate level:
Furthermore, candidates aspiring to gain admission into Computer Engineering department under Faculty of Engineering / Technology, should at least obtain five (5) credit (C5 and above) passes in their SSCE subjects including:
|
11. Computer ScienceComputer Science (CS) covers software development, algorithms, programming, artificial intelligence, cybersecurity, and database management… |
Computer Science
Applicants must carefully assess the requirements of their Diploma program and work with academic advisors to adapt their course schedules in order to be admitted to Kaduna Polytechnic (KADPOLY). Some common components that are usually included in prerequisites for undergraduate Computer Science courses are as follows:
Furthermore, candidates seeking admission into the Computer Science department under Faculty of Data and Decision Sciences, must have at least five (5) credits (C5 and more) in their SSCE disciplines, including the following:
any two (2) other Science subjects.
|
12. Cooperative Economics and Management Cooperative Economics and Management (CEM) examines cooperative business models and managerial strategies for rural finance, agribusiness, and collective enterprises… |
Cooperative Economics and Management
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Cooperative Economics and Management course admission requirements at the undergraduate level:
Additionally, candidates aspiring to gain admission into Cooperative Economics and Management department under Faculty of Administration, should at least obtain five (5) credit (C5 and above) passes in their SSCE subjects including:
any other two (2) subjects.
For NBC Holders, the other subjects could be from the following: Principles of Accounts, Commerce, and Accounts.
|
13. Electrical / Electronic Engineering TechnologyElectrical / Electronic Engineering Technology offers practical training in the installation, maintenance, and troubleshooting of electrical and electronic systems… |
Electrical / Electronic Engineering Technology
For admission to Kaduna Polytechnic (KADPOLY), candidates must carefully review the prerequisites for their Diploma program and collaborate with academic advisors to modify their course schedules. The following are some typical elements that are typically included in requirements for Electrical / Electronic Engineering Technology courses at the undergraduate level:
Furthermore, candidates seeking admission into the Electrical / Electronic Engineering Technology department under Faculty of Engineering / Technology, must have at least five (5) credits (C5 and more) in their SSCE disciplines, including the following:
any other Science Subject.
|
14. Estate Management and ValuationEstate Management and Valuation equips students with skills in property appraisal, investment analysis, and legal aspects of land administration… |
Estate Management and Valuation
For admission to Kaduna Polytechnic (KADPOLY), candidates must carefully review the prerequisites for their Diploma program and collaborate with academic advisors to modify their course schedules. The following are some typical elements that are typically included in requirements for Estate Management and Valuation courses at the undergraduate level:
Furthermore, candidates aspiring to gain admission into Estate Management and Valuation department under Faculty of Built Environment, should at least obtain five (5) credit (C5 and above) passes in their SSCE subjects including:
Economics, Arts, Physics,
Technical Drawing, Chemistry and Biology
|
15. Fashion Design and Clothing TechnologyFashion Design and Clothing Technology blends creativity with textile technology, pattern drafting, and garment production for careers in the fashion industry… |
Fashion Design and Clothing Technology
To get into Kaduna Polytechnic (KADPOLY), applicants must carefully consider the criteria of their Diploma program and collaborate with academic advisors to modify their course schedules. The following are some typical elements that are typically included in prerequisites for undergraduate Fashion Design and Clothing Technology courses:
Moreover, candidates aspiring to gain admission into Fashion Design and Clothing Technology department under Faculty of Engineering / Technology, should at least obtain five (5) credit (C5 and above) passes in their SSCE subjects including:
Home Economics/Technical Drawing and
any four of the following:
Fine Art, History, Physics, Chemistry, Biology/Agricultural Science, Mathematics, Clothing and Textiles, Literature in English, English Language, Home Management
At least a credit pass in English Language is compulsory.
|
16. Food TechnologyFood Technology focuses on the scientific methods of food processing, preservation, and packaging to ensure safety, shelf life, and quality… |
Food Technology
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Food Technology course admission requirements at the undergraduate level:
Additionally, candidates seeking admission into the Food Technology department under Faculty of Science, must have at least five (5) credits (C5 and more) in their SSCE disciplines, including the following:
Biology / Agricultural Science,
any two of the following:
Geography, Food and Nutrition, Economics, Technical Drawing, Physics, Chemistry, Nigerian Language and Home Economics.
At least a pass in Chemistry is required.
|
17. Hospitality ManagementHospitality Management provides training in food services, accommodation, and guest experience management in hotels, resorts, and restaurants… |
Hospitality Management
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Hospitality Management course admission requirements at the undergraduate level:
Additionally, candidates seeking admission into the Hospitality Management department under Faculty of Social Sciences, must have at least five (5) credits (C5 and more) in their SSCE disciplines, including the following:
Biology/Agricultural Science,
and any one (1) of the following:
Geography, Food and Nutrition, Economics, Physics,
Technical Drawing, Nigerian Language and Home Economics.
|
18. Industrial Safety and Environmental Engineering TechnologyIndustrial Safety and Environmental Engineering Technology trains students to manage industrial hazards and environmental risks with focus on health, waste control, and safety systems… |
Industrial Safety and Environmental Engineering Technology
For admission to Kaduna Polytechnic (KADPOLY), candidates must carefully review the prerequisites for their Diploma program and collaborate with academic advisors to modify their course schedules. The following are some typical elements that are typically included in requirements for Industrial Safety and Environmental Engineering Technology courses at the undergraduate level:
Moreover, candidates aspiring to gain admission into Industrial Safety and Environmental Engineering Technology department under Faculty of Engineering / Technology, should at least obtain five (5) credit (C5 and above) passes in their SSCE subjects including:
any two (2) subjects from:
Biology/Agricultural Science, Technical Drawing,
Basic Electronics / Basic Electricity,
Basic Electronics / Basic Electricity, Auto Mechanics, Metal Work,
Woodwork (for Civil Engineering Tech.),
Further Mathematics, Geography, Economics / Commerce.
|
19. Leisure and Tourism ManagementLeisure and Tourism Management prepares students to manage hospitality, travel, and recreational services locally and internationally… |
Leisure and Tourism Management
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Leisure and Tourism Management course admission requirements at the undergraduate level:
Additionally, a minimum of five (5) credit passes (C5 and higher) in their SSCE subjects, including the following, are required for applicants to the Leisure and Tourism Management department under Faculty of Social Sciences.
one Basic Science subject and
Economics/Commerce, History, Book Keeping Principles of Accounting, Mathematics, Fine Arts, French Language, Government, Food and Nutrition, Nigerian Language, Home Economics
A credit pass in Mathematics is compulsory.
|
20. Library and Information ScienceLibrary and Information Science (LIS) focuses on the organization, retrieval, and dissemination of information using traditional and digital systems… |
Library and Information Science
In order to be admitted to Kaduna Polytechnic (KADPOLY), applicants must carefully consider the criteria of their Diploma program and work with academic advisors to adjust their course schedules. The following are some typical elements that are frequently included in undergraduate Library and Information Science course entry requirements:
Moreover, a minimum of five (5) credit passes (C5 and higher) in their SSCE subjects, including the following, are required for applicants to the Library and Information Science department under Faculty of Arts and Humanities.
two (2) other Science subjects.
|
21. Local Government StudiesLocal Government Studies trains students in administration, finance, and policy formulation for effective management of local government systems… |
Local Government Studies
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Local Government Studies course admission requirements at the undergraduate level:
Moreover, candidates aspiring to gain admission into Local Government Studies department under Faculty of Social Sciences, should at least obtain five (5) credit (C5 and above) passes in their SSCE subjects including:
English Language (not Literature in English)
Any three subjects from the following: Economics / Commerce, Business Methods, Principles of Accounts, Literature in English, Geography, Office Practice, Government, Biology / Agricultural Science, Chemistry, Physics, History / Government, Typewriting, and Shorthand
|
22. Mass CommunicationMass Communication (MC) covers journalism, broadcasting, and media communication across print, digital, and audiovisual platforms… |
Mass Communication
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Mass Communication course admission requirements at the undergraduate level:
Additionally, candidates aspiring to gain admission into Mass Communication department under Faculty of Communication and Media Studies, should at least obtain five (5) credit (C5 and above) passes in their SSCE subjects including:
any four (4) other subjects in Arts or Social Sciences.
|
23. Mechanical Engineering TechnologyMechanical Engineering Technology applies engineering principles to machinery installation, maintenance, and production systems… |
Mechanical Engineering Technology
In order to be admitted to Kaduna Polytechnic (KADPOLY), applicants must carefully consider the criteria of their Diploma program and work with academic advisors to adjust their course schedules. The following are some typical elements that are frequently included in undergraduate Mechanical Engineering Technology course entry requirements:
Additionally, the minimum requirement for applicants seeking admission to the Mechanical Engineering Technology department under Faculty of Engineering / Technology, is five (5) credits (C5 and higher) in their SSCE subjects, including the following:
Biology/Agricultural Science, Technical Drawing, Basic Electronics/Basic Electricity, Auto Mechanics, Metal Work, Woodwork (for Civil Engineering Tech.), Further Mathematics, English Language, Geography and Economics/Commerce
For Marine Engineering and Industrial Safety & Environmental Engineering a pass in Biology is required.
|
24. Mineral and Petroleum Resources Engineering TechnologyMineral and Petroleum Resources Engineering Technology develops technical expertise in extracting, refining, and managing mineral and petroleum resources, with focus on fieldwork, drilling technologies, and reservoir analysis… |
Mineral and Petroleum Resources Engineering Technology
Applicants must carefully assess the requirements of their Diploma program and work with academic advisors to adapt their course schedules in order to be admitted to Kaduna Polytechnic (KADPOLY). Some common components that are usually included in prerequisites for undergraduate Mineral and Petroleum Resources Engineering Technology courses are as follows:
Additionally, candidates aspiring to gain admission into Mineral and Petroleum Resources Engineering Technology department under Faculty of Engineering / Technology, should at least obtain five (5) credit (C5 and above) passes in their SSCE subjects including:
Woodwork for Civil Engineering Technology, Further Mathematics, English Language, Geography, Economics/Commerce,
Biology/Agricultural Science, Technical Drawing, Basic Electronics/Basic Electricity, Auto Mechanics, Metal Work.
|
25. Nutrition and DieteticsNutrition and Dietetics prepares students to provide dietary advice, manage nutritional therapy, and promote health in clinical and community settings… |
Nutrition and Dietetics
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Nutrition and Dietetics course admission requirements at the undergraduate level:
Additionally, a minimum of five (5) credit passes (C5 and higher) in their SSCE subjects, including the following, are required for applicants to the Nutrition and Dietetics department under Faculty of Health and Medical Sciences.
Biology/Agricultural Science.
|
26. Office Technology and ManagementOffice Technology and Management (OTM) emphasizes administrative practices, ICT tools, and organizational communication… |
Office Technology and Management
To get into Kaduna Polytechnic (KADPOLY), applicants must carefully consider the criteria of their Diploma program and collaborate with academic advisors to modify their course schedules. The following are some typical elements that are typically included in prerequisites for undergraduate Office Technology and Management courses:
Furthermore, candidates seeking admission into the Office Technology and Management department under Faculty of Management Sciences, must have at least five (5) credits (C5 and more) in their SSCE disciplines, including the following:
English Language (not Literature in English),
any three subjects from the following:
Economics/Commerce, Business Methods, Principles of Accounts, Literature in English, Geography,
Office Practice, Biology/Agricultural Science, Chemistry, Physics, History/Government, Typewriting and Shorthand.
|
27. Printing TechnologyPrinting Technology covers modern printing processes, design software, and production systems for publishing, packaging, and graphic media… |
Printing Technology
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Printing Technology course admission requirements at the undergraduate level:
Additionally, candidates aspiring to gain admission into Printing Technology department under Faculty of Engineering / Technology, should at least obtain five (5) credit (C5 and above) passes in their SSCE subjects including:
any two (2) other subjects from:
Metal Work, Basic Electricity, Technical Drawing/Fine Art,
Book Keeping and Principles of Accounting, Economics/Commerce,
|
28. Public AdministrationPublic Administration (PA) prepares students to manage government agencies, public programs, and policy implementation… |
Public Administration
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Public Administration course admission requirements at the undergraduate level:
Moreover, a minimum of five (5) credit passes (C5 and higher) in their SSCE subjects, including the following, are required for applicants to the Public Administration department under Faculty of Administration.
two (2) other relevant subjects.
|
29. Quantity SurveyQuantity Surveying (QS) covers cost estimation, construction planning, and contract administration in building and infrastructure projects… |
Quantity Survey
To get into Kaduna Polytechnic (KADPOLY), applicants must carefully consider the criteria of their Diploma program and collaborate with academic advisors to modify their course schedules. The following are some typical elements that are typically included in prerequisites for undergraduate Quantity Survey courses:
Furthermore, the minimum requirement for applicants seeking admission to the Quantity Survey department under Faculty of Built Environment, is five (5) credits (C5 and higher) in their SSCE subjects, including the following:
any of Fine Art, Geography or Wood Work, Biology, Economics, Technical Drawing, Further. Mathematics, Introduction to Building Construction, Bricklaying / Block laying, Concreting, Wall, Floors and Ceiling Finishing, Joinery, Carpentary, Decorative Painting, Lining, Sign and Design, Wall Hanging, Colour Mixing / Matching and Glazing, Ceramics, Graphics Design, Graphic Printing, Basic Electricity.
|
30. Science Laboratory TechnologyScience Laboratory Technology (SLT) trains students to operate and manage scientific laboratories for chemical, biological, and physical analysis… |
Science Laboratory Technology
To get into Kaduna Polytechnic (KADPOLY), applicants must carefully consider the criteria of their Diploma program and collaborate with academic advisors to modify their course schedules. The following are some typical elements that are typically included in prerequisites for undergraduate Science Laboratory Technology courses:
Furthermore, candidates aspiring to gain admission into Science Laboratory Technology department under Faculty of Science, should at least obtain five (5) credit (C5 and above) passes in their SSCE subjects including:
Any two (2) subjects from: Physics, Chemistry, and Biology / Agricultural Science / Health Science
Any other two (2) relevant subjects (Technical Drawing, Metal / Wood Work, Basic Electricity, Geography, Further Mathematics, and Fine Art)
|
31. Social DevelopmentSocial Development addresses community advancement through policy implementation, intervention methods, and strategies to improve social well-being… |
Social Development
In order to be admitted to Kaduna Polytechnic (KADPOLY), applicants must carefully consider the criteria of their Diploma program and work with academic advisors to adjust their course schedules. The following are some typical elements that are frequently included in undergraduate Social Development course entry requirements:
Furthermore, candidates seeking admission into the Social Development department under Faculty of Social Sciences, must have at least five (5) credits (C5 and more) in their SSCE disciplines, including the following:
any three (3) subjects from the following:
Economics/Commerce, Business Methods, Principles of Accounts, Literature in English, Geography,
Office Practice, Government, Biology/Agricultural Science, Chemistry, Physics, History/Government, Typewriting and Shorthand.
|
32. StatisticsStatistics provides tools for data collection, analysis, and interpretation across diverse fields… |
Statistics
To get into Kaduna Polytechnic (KADPOLY), applicants must carefully consider the criteria of their Diploma program and collaborate with academic advisors to modify their course schedules. The following are some typical elements that are typically included in prerequisites for undergraduate Statistics courses:
Additionally, the minimum requirement for applicants seeking admission to the Statistics department under Faculty of Science, is five (5) credits (C5 and higher) in their SSCE subjects, including the following:
any other relevant subject.
|
33. Surveying and GeoinformaticsSurveying and Geoinformatics involves land measurement, spatial data collection, and digital mapping with modern geospatial tools… |
Surveying and Geoinformatics
Candidates aspiring to gain admission into Kaduna Polytechnic (KADPOLY) is expected to be aware of the specific requirements of their Diploma program and work closely with academic advisors to plan their course schedules accordingly. Here are some common components often included in Surveying and Geoinformatics course admission requirements at the undergraduate level:
Additionally, candidates seeking admission into the Surveying and Geoinformatics department under Faculty of Engineering / Technology, must have at least five (5) credits (C5 and more) in their SSCE disciplines, including the following:
Joinery, Carpentry, Decorative Painting, Lining, Sign & Design, Wall Hanging, Colour Mixing / Matching & Glazing, Ceramics, Graphics Design, Graphic Printing, Basic Electricity,
Fine Art, Geography or Wood Work, Biology, Economics, Technical Drawing, Further Mathematics, Introduction to Building Construction, Bricklaying / Block Laying, Concreting, Wall, Floors and Ceiling Finishing.
|
34. Textile TechnologyTextile Technology focuses on industrial processes in fiber production, spinning, weaving, and fabric development for sustainable textile manufacturing… |
Textile Technology
To get into Kaduna Polytechnic (KADPOLY), applicants must carefully consider the criteria of their Diploma program and collaborate with academic advisors to modify their course schedules. The following are some typical elements that are typically included in prerequisites for undergraduate Textile Technology courses:
Moreover, the minimum requirement for applicants seeking admission to the Textile Technology department under Faculty of Engineering / Technology, is five (5) credits (C5 and higher) in their SSCE subjects, including the following:
any other relevant subject from:
Biology/Agricultural Science,
Geography, Home Economics,
Fine Art, Economics/Commerce,
Clothing and Textile, Technical Drawing.
|
35. Urban and Regional PlanningUrban and Regional Planning (URP) addresses land use, infrastructure, and sustainable city development for balanced urban growth… |
Urban and Regional Planning
For admission to Kaduna Polytechnic (KADPOLY), candidates must carefully review the prerequisites for their Diploma program and collaborate with academic advisors to modify their course schedules. The following are some typical elements that are typically included in requirements for Urban and Regional Planning courses at the undergraduate level:
Furthermore, the minimum requirement for applicants seeking admission to the Urban and Regional Planning department under Faculty of Earth and Mineral Sciences, is five (5) credits (C5 and higher) in their SSCE subjects, including the following:
Physics, Chemistry, Economics, Government, Biology, Art, History, IRK/CRK, Social Studies and Tech Drawing.
|
