Construction of Soap Moulds Table and Cutters

Construction of Soap Moulds, Table and Cutters

Project / Seminar Material
Reference ID: PS-3175-TM

DEDICATION

This research material titled “Construction of Soap Moulds, Table and Cutters” is dedicated to God for his enabling grace, and to all computer enthusiasts who contributed to make life a pleasant experience during my research documentation.

ACKNOWLEDGEMENT

I extend my sincere gratitude to all those who contributed to the completion of this project. Special thanks to my Supervisor (Name of your Supervisor), the Head of Department (Name of your HOD), the Lecturers in the department of Chemical Engineering, Book Authors and Profound Scholars of existing or related project material on “Construction of Soap Moulds, Table and Cutters” for their invaluable guidance, support, and expertise throughout the journey.

I am also grateful to your study area (mention any funding organizations, if applicable) for their financial assistance. This research would not have been possible without the encouragement and assistance of some stakeholders (mention any mentors, teachers, or colleagues). Additionally, I would like to acknowledge the understanding and patience of my family and friends during this endeavor. Your unwavering support has been a constant source of motivation. Thank you all for being part of this meaningful endeavor.

ABSTRACT

A mould can generally be defined as a pattern constructed for the production of the same shape and size. The constructional material differs from one operation to another. When one considers the money at hand, he decides whether to start from the primary production level or secondary production level. Referring to the project, the aim is for the establishment of small-scale production. This would employ the use of the manual soap cutters, which is either used to cut the soap produced into bars or tablets depending on specification.

In the construction works flat hard woods of 20m thickness were cut and assembled by nailing. The constructed woulds have the following dimensions : 15cm long, 38cm wide and 15cm high.

The moulds are rectangular in shape. Handles was incorporated in the mould to make it convenient to be carried about during soap production.

Finally, the five moulds produced were capable of presenting relatively resistance to impact and bending forces as a result of the hard wood that was used. With this the moulds can carry a reasonable volume of soap Surry without collapsing.

Construction of Soap Moulds, Table and Cutters

CHAPTER ONE

1.0 Introduction

The equipment mostly used or applied in the industries and manufacturing setups requiring the production of definite patterns, shapes and different designs, embossments and others, are usually moulds.

The moulds used for the numerous types of plastic and the several types of moulding methods in commercial use constitute a controlling factor in the molding industry. The most advantageous utilization of both plastic and molding equipment requiring a properly designed and constructed mould.

The application of moulds depends on its ability to withstand pressure, corrosion and distortion.

Mould can be defined as a pattern constructed for the manufacture of the same prototype. The material of construction of moulds varies from one operation to another. The need for the designing and development of moulds of different materials, composition, texture, shape, resistance arises as a result of the diverse application of moulds in manufacturing industries.

Early moulds were used by blacksmiths in construction and designing materials of different shapes and sizes. Moulds basically consists of a cavity and a plunger, or force. Most moulds also include an ejection mechanism for removing the moulded article.

…

CHAPTER TWO

2.0 Literature Review

2.1 Introduction

This chapter focuses on the review of related literature. A literature review includes the current knowledge as well as theoretical and methodological contributions to a particular topic. It documents the state of the art with respect to the topic you are writing. It surveys the literature in the topic selected. In this research work the literature review includes the …

Summary Headlines for Construction of Soap Moulds, Table and Cutters