The Design and Construction of a 40 Watt HiFi Amplifier

The Design and Construction of a 40 Watt Hi-Fi Amplifier

Project / Seminar Material
Reference ID: PS-3624-TM

DEDICATION

This research material titled “The Design and Construction of a 40 Watt Hi-Fi Amplifier” is dedicated to God for his enabling grace, and to all computer enthusiasts who contributed to make life a pleasant experience during my research documentation.

ACKNOWLEDGEMENT

I extend my sincere gratitude to all those who contributed to the completion of this project. Special thanks to my Supervisor (Name of your Supervisor), the Head of Department (Name of your HOD), the Lecturers in the department of Electrical / Electronics Engineering (EE), Book Authors and Profound Scholars of existing or related project material on “The Design and Construction of a 40 Watt Hi-Fi Amplifier” for their invaluable guidance, support, and expertise throughout the journey.

I am also grateful to your study area (mention any funding organizations, if applicable) for their financial assistance. This research would not have been possible without the encouragement and assistance of some stakeholders (mention any mentors, teachers, or colleagues). Additionally, I would like to acknowledge the understanding and patience of my family and friends during this endeavor. Your unwavering support has been a constant source of motivation. Thank you all for being part of this meaningful endeavor.

ABSTRACT

The early transmitter for radio broadcasting is so big and bulky that they do occupy numerous spaces. The circuitries are mainly designed with valves, which are big in sizes.

With the advent of semiconductor materials such as transistors electronic equipment are now becoming miniaturized such that small transmitters are now becoming handy and compact.

In line with this we choose to design a complete radio broadcasting equipment tat is compact and existence of semiconductor materials.

The system units are of two categories namely: audio console for the processing and mixing of musicals is basically a condenser microphone.

The transmitter unit is where the center frequency is provided. All these were designed to be in compact and small manner. This project is aimed at serving a community using a small and compact radio broadcasting equipment with a power watt of 1 watt a community of 1 kilometer in radius should be covered comfortable and the audio production very clear unlike the common noisy FM microphone project.

The Design and Construction of a 40 Watt Hi-Fi Amplifier

CHAPTER ONE

1.0 Introduction

High power amplifier are usually quite costly and usually beyond the easy reach of most audio enthusiastic (and Hi-Fi buffs) who then have to remain satisfied with those small 6 watt amplifiers. Well, with this introduction to us and to electronics, things should change. Well this low cost Hi-Fi amplifier that delivers ear chatting and thundering output of an unbelievable forty watts. The unique features of this circuit are.

  1. Low cost — The basic criteria
  2. Compact size
  3. Very low transient noise on “power on” and low THO
  4. Effective Bass and treble controls
  5. Automatic thermal shut down system it switches off the amplifier in case of overheating
  6. Load damp protection in built.

The circuit uses a high power amplifier chip viz the LA 4440. The circuit is quite self explanatory. The input is coupled by a small value capacitor. The output is taken through a block terminal and fed to the speaker.

…

CHAPTER TWO

2.0 Literature Review

2.1 Introduction

This chapter focuses on the review of related literature. A literature review includes the current knowledge as well as theoretical and methodological contributions to a particular topic. It documents the state of the art with respect to the topic you are writing. It surveys the literature in the topic selected. In this research work the literature review includes the …

Summary Headlines for The Design and Construction of a 40 Watt Hi-Fi Amplifier