Project Topics Seminar Topics Post UTME Nursing Exam Past Questions
Search Topic
PARKLYN
ERVICES
 · RC: 2994849
Construction of Aluminium Wall Rack

Construction of Aluminium Wall Rack

@SparklynServices
WhatsApp Channel

DEDICATION

This research material, titled “Construction of Aluminium Wall Rack” is dedicated to God for His boundless grace and guidance. It is also a tribute to all computer enthusiasts whose contributions made my research journey smoother and enriched my documentation process, making the experience truly fulfilling.



ACKNOWLEDGEMENT

I am profoundly grateful to everyone who contributed to the successful completion of this project. I am especially grateful to my Supervisor (Name), the Head of Department (Name), and the Lecturers in the Department of Chemical Engineering for their invaluable guidance and support. I also acknowledge the contributions of authors and scholars whose works on Construction of Aluminium Wall Rack provided essential insights. Special thanks go to my study area (and any funding organizations, if applicable) for their financial assistance. I am equally thankful to stakeholders, including mentors, teachers, and colleagues, for their encouragement and support. Finally, I deeply appreciate my family and friends for their patience and unwavering support throughout this journey. Your contributions have been instrumental in making this research a reality.



TABLE OF CONTENTS

PRELIMINARY PAGES

CHAPTER ONE

  • 1.0 Introduction

CHAPTER TWO

  • 2.0 Literature Review
  • 2.1 Types of Racks
  • 2.1.1 Wall/Mini Racks
  • 2.1.2 Industries Racks
  • 2.2 Rack Protection
  • 2.2.1 Fire Protection
  • 2.3 Materials of Construction
  • 2.3.1 Aluminum
  • 2.3.2 Bronzes
  • 2.3.3 Wood
  • 2.3.4 Glass

CHAPTER THREE

  • 3.0 Constructional Procedure
  • 3.1 Marking Out / Measurement
  • 3.2 Cutting Operations
  • 3.3 Filing Operations
  • 3.4 Drilling Operations
  • 3.5 Milling Operations
  • 3.6 Coupling and Nailing
  • 3.7 The Instruments
  • 3.7.1 The Milling Machines
  • 3.7.2 The Drilling Machines
  • 3.7.3 The Tape
  • 3.7.4 The Saw
  • 3.7.5 The Diamond
  • 3.8 Working Diagrams
  • 3.9 Parts of the Rack

CHAPTER FOUR

  • 4.1 Discussion
  • 4.2 Conclusion
  • 4.3 Recommendation

REFERENCES

  • Costing

    • ABSTRACT

    This project was constructed with the desired materials of construction. The materials include aluminum, glass and wood. Aluminum was used in forming the skeleton of the structure, glass was used for the doors while wood was used in the sides, top, base and partitions.

    After building the skeleton of the structure with aluminum, other materials were used and made up the complete structure. Materials like glass and wood.

    Among the different types of glass available, the thick glass was used due to the fact that it offers greater resistance to hit than some thin glasses through the resistances is not much and can be broken by a fore more than fitty Newton — 50N. The glass was cut into the measured dimensions by the equipment called “diamond”. The diamond divides the glass perfectly according to the marker.

    The wood used in the construction was cut with the aid of a saw and the edges smoothed with a file. Both the wood and glass were held firm in the aluminum rail with the aid of a projected rubber.

    The aluminum profiles were cut with the aid of an electrically powered machine cutter though manual cutters are available but electrical cutter reduces efforts.


    Construction of Aluminium Wall Rack

    CHAPTER ONE

    1.0 Introduction

    Racks are storage systems used in industries, homes, institutions etc.

    Rock of interest of this project is the type of rack found in homes and some other institution. This is a minim rack or wall rack as it is normally called. This rack is hung on walls and partitioned within small ranges where material of small size can be kept.

    Industries steel storage racks as they are known today did not exist 35 y ears ago. Rail road cars filled with material in cardboard cartons were hand unloaded into four wheeled platform tracks that were pushed to the elevator of a multistioned ware house and the cartons hand unloaded into stacks on floors with 10 metres high ceilings. People used the same various trucks to assemble orders from the various stacks pushing the loaded truck to the elevator and then to the shipping dock where they were unloaded into vehicles for store delivery. Such rudimentary distribution has been radically changed by some relatively simple innovations.

    Forklift trucks have replaced man powered vehicles and loading methods. They have been on the materials handling stage since the early 1900s and received their biggest impetus during World War II when forklifts were the logistical workhorses of the army and navy.

    Unit loads of 2000 — 400016 that are easily picked up and transported by forklift trucks make highway trailer loading and unloading matter of minutes compared to the many hours for the hand unload method.

    Industrial ware house buildings with one story ceiling heights of 30ft and wide column bay spalings replaced the multi stored ware houses and are ideally suited for use with the unit load and forklift concept.

    Industrial steel storage racks proved to be the fourth necessary materials handling device to maximize the efficiency of the previous three because of “selectivity” and carton crish out. If one unit load is tried on top of another up to 30ft ceiling height, the bottom load cannot be shipped unless the top ones are removed.

    Computer technology has recently been added to all the foregoing to optimize the use and operation. Today's modern computes tell the distribution manager when to store the incoming unit loads, when and where to move to the picking face, the sequence in which to pick, and what and when to record.

    All these component together have provided an efficient system that distributes the food, shelter and clothing of our oriented society.

    …

    CHAPTER TWO

    2.0 Literature Review

    2.1 Introduction

    This chapter focuses on the review of related literature. A literature review includes the current knowledge as well as theoretical and methodological contributions to a particular topic. It documents the state of the art with respect to the topic you are writing. It surveys the literature in the topic selected. In this research work the literature review includes the conceputal review, theoretical framework, the review of related literature …

    Procedure for Accessing and Downloading the Complete Material in PDF or DOCX Format

    Above is a preview excerpt of the full study on “Construction of Aluminium Wall Rack”. The complete material, including all five chapters, is available for download upon request.

    To obtain the complete research material content, simply place an order by paying the specified project or seminar fee using the account details or electronic payment (E-payment) system provided below.

    Seminar Material
    ₦3,000    		Project Material
    ₦5,000

    For Mobile Money (MoMo) and Researchers Outside Nigeria, Kindly Request Complete Material via WhatsApp.

    Account Details - For USSD / POS Transfer

    ACCT NAMESPARKLYN SERVICES
    Zenith Bank PLC1222599051
    MoniePoint (MFB)8030511988
    Paycom (OPay)8030511988

    –– or ––

    After payment, send message containing your payment receipt to Sparklyn Services with the phone number displayed below.

    Once payment is confirmed, the complete document will be delivered via WhatsApp or email in Microsoft Word (MS-Word) format.

    You can get more research topics on Chemical Engineering, if you did not see your preferred topic from the alternate list above.

    Defense Procedure for Chemical Engineering Researchers

    In preparation for defending a project or seminar on Construction of Aluminium Wall Rack, it is imperative that as a nursing student, you demonstrate comprehensive knowledge of your research. The defense process is structured to include presenting your work, answering questions, and illustrating its pertinence. Initially, provide a succinct yet thorough introduction to your research topic, emphasizing its importance and the objectives, ensuring that both the audience and the External Examiner can understand the scope of your study.

    Prior to your defense, be thoroughly acquainted with your research abstract and the critical elements of Chapter One, including motivation for embarking on this research, problem statement, objectives, and significance. In Chapter Two, be ready to cite at least two references from the literature review. For Chapter Three, you should be equipped to discuss the methodologies, tools, and techniques utilized. In Chapter Four, defend your research by justifying the findings and linking them to your research objectives.

    Conclude your defense by succinctly summarizing the study and offering insightful, evidence-based recommendations. A professional dress code, such as wearing a suit and tie, is vital to create a favorable impression and elevate your presentation.

    During the question and answer segment, the External Examiner may pose questions pertaining to your research. If confronted with a challenging or irrelevant question, respond diplomatically with, “Sorry, Sir/Madam, the question asked is beyond the scope of my study.” Whenever possible, direct your answers back to your research findings to reinforce your expertise.

    Page Content Headings - Construction of Aluminium Wall Rack
      Download Material (Docx)