Design and Manufacture a Natural Convection Solar Dryer Which Requires Little Or No Maintenance

Design and Manufacture a Natural Convection Solar Dryer Which Requires Little Or No Maintenance

Project / Seminar Material
Reference ID: PS-1517-TM

DEDICATION

This research material titled “Design and Manufacture a Natural Convection Solar Dryer Which Requires Little Or No Maintenance” is dedicated to God for his enabling grace, and to all computer enthusiasts who contributed to make life a pleasant experience during my research documentation.

ACKNOWLEDGEMENT

I extend my sincere gratitude to all those who contributed to the completion of this project. Special thanks to my Supervisor (Name of your Supervisor), the Head of Department (Name of your HOD), the Lecturers in the department of Science and Engineering, Book Authors and Profound Scholars of existing or related project material on “Design and Manufacture a Natural Convection Solar Dryer Which Requires Little Or No Maintenance” for their invaluable guidance, support, and expertise throughout the journey.

I am also grateful to your study area (mention any funding organizations, if applicable) for their financial assistance. This research would not have been possible without the encouragement and assistance of some stakeholders (mention any mentors, teachers, or colleagues). Additionally, I would like to acknowledge the understanding and patience of my family and friends during this endeavor. Your unwavering support has been a constant source of motivation. Thank you all for being part of this meaningful endeavor.


Design and Manufacture a Natural Convection Solar Dryer Which Requires Little Or No Maintenance

CHAPTER ONE

1.0 Introduction

1.1 Background Of The Study

Drying is one of the oldest methods of food preservation. For many years, people have been preserving agricultural products by drying until caning was developed at the end of the 18th century (Ekechukwu and Norton, 1999). The importance of dried foods cannot be overestimated as the kitchens and food stores in any country will confirm the quantity and diversity of dried food in use. Drying is essentially a process of moisture removal due to simultaneous heat and mass transfer. It is a classical method of food preservation which provides longer shelf life,lighter weight for transportation and small space for storage. Drying could be of various methods such as open sundrying,direct and indirect solar drying etc.

Open sundrying which is the most commonly used method to preserve agricultural products like grains, fruits and vegetables in most developing countries. Such drying under hostile climatic conditions leads to severe losses in the quantity and quality of the dried product .This losses related to contamination by dirt, dust, bird droppings and infestation by insects, rodents and animals as well as the quality of the products being degraded due to uncontrolled heat in sundrying even up t the extent that the food products are inedible (whitefield, 2000). Therefore the introduction of solar dryers in developing countries can reduce crop losses and improve the quality of the dried product significantly when compared to the traditional methods.

Solar dryers could be either Natural convection of forced convection solar dryers. The Natural solar dryer is such that it controls the drying process and protects the agricultural produce from contamination by insects, dust, bird droppings, invasions by animals, and in comparison to Natural solar dryers, it generates higher temperatures, lower relative humidity, lower produce moisture content and reduce spoilage during drying process in addition, it takes less time and is relatively inexpensive when compared to artificial mechanical drying method (Ged-Gujur at Energy development Agency, 2003, www.geda.com). Dried foods using natural convection solar dryers are quality products that can be stored for extended nutritive values.


1.2 Statement of the Problem

A country which cannot feed its people is bound to fail, and so food production without adequate preservation amounts to waste. In Nigeria, subsistent agriculture amounts to a major percentage of food produced and so due to inadequacy of storage facilities and proper preservation, all round year availability of farm produce is mostly difficult.

Natural convection solar dryers which tackles the major drawbacks of the usual sundrying has been used in most countries to solve problems associated with economical food preservation. The target has always been to supply this natural convection solar dryers to the rural farmers in a cheap and portable manner.

The focus of this project is to supply drying need at a cheaper price. It is to design and manufacture a natural convection solar dryer which requires little or no maintenance and can be easily accessible to the rural woman.


1.3 Aim And Objectives

The aim of this study is to design and fabricate a portable mobile natural convection solar dryer which can be easily moved from place to place and is suitable for drying sliced yam. In order to achieve this aim, the following objectives would be pursued;

  1. To examine different drying methods.
  2. Identify and characterize different factors that affect drying.
  3. Examine annual weather conditions in the Benin city metropolis.
  4. Calculate and determine relevant dimensions.
  5. Identify and characterize different insulating materials.
  6. Fabricate and test the solar dryer.

1.4 Methodology

In pursuance of the objective of this project and with a view to achieve the aim, adequate literature would be reviewed in method of drying, regular data would be collected a basis for designing and fabricating suitable natural convection dryer. The dryer would be tested and the efficiency computed.


1.5 Significance of the Study

The outcome of this work would allow food producers to ensure adequate drying of sliced yam produce, allowing for the availability of the dried product all season of the year, reducing food wastage due to crude, ineffective and expensive drying techniques.


1.6 Scope of Study

This work is limited to the drying of sliced yam produce. It is a natural convection solar dryer and there would be no moving part. Annual data collection is limited to three years. Weather conditions would be suitable for Nigerian environment suitably Benin City.

CHAPTER TWO

2.0 Literature Review

2.1 Introduction

This chapter focuses on the review of related literature. A literature review includes the current knowledge as well as theoretical and methodological contributions to a particular topic. It documents the state of the art with respect to the topic you are writing. It surveys the literature in the topic selected. In this research work the literature review includes the …

Summary Headlines for Design and Manufacture a Natural Convection Solar Dryer Which Requires Little Or No Maintenance