Project Topics Seminar Topics Post UTME Nursing Exam Past Questions
Search Topic
PARKLYN
ERVICES
· RC: 2994849
Construction of Wheelbarrow

Construction of Wheelbarrow

@SparklynServices
WhatsApp Channel

DEDICATION

This research material, titled “Construction of Wheelbarrow” is dedicated to God for His boundless grace and guidance. It is also a tribute to all computer enthusiasts whose contributions made my research journey smoother and enriched my documentation process, making the experience truly fulfilling.




ACKNOWLEDGEMENT

I am profoundly grateful to everyone who contributed to the successful completion of this project. I am especially grateful to my Supervisor (Name), the Head of Department (Name), and the Lecturers in the Department of Chemical Engineering for their invaluable guidance and support. I also acknowledge the contributions of authors and scholars whose works on Construction of Wheelbarrow provided essential insights. Special thanks go to my study area (and any funding organizations, if applicable) for their financial assistance. I am equally thankful to stakeholders, including mentors, teachers, and colleagues, for their encouragement and support. Finally, I deeply appreciate my family and friends for their patience and unwavering support throughout this journey. Your contributions have been instrumental in making this research a reality.




PRELIMINARY PAGES


CHAPTER ONE

INTRODUCTION

  • 1.1 Introduction
  • 1.2 Origin and History
  • 1.3 Identification Offered
  • 1.4 Scope of Study
  • 1.5 Limitations of the study

CHAPTER TWO

LITERATURE REVIEW

  • 2.1 Introduction
  • 2.2 Historical Review of Wheelbarrow
  • 2.4 Theory & Mechanism of Operation of Wheelbarrow
  • 2.5 Design Partition
  • 2.6 Conceptual Ideas
  • 2.7 Engineering Analysis
  • 2.8 Wheelbarrow and Other Classes of Lever
  • 2.9 Uses / Importance of Wheelbarrow
  • 2.10 Material Selection / Material of Construction

CHAPTER THREE

FABRICATION/CONSTRUCTION OF WHEELBARROW

  • 3.1 Procurement of the Material for Construction
  • 3.2 Marking Out / Centre Punching
  • 3.3 Cutting and Rolling
  • 3.4 Welding
  • 3.5 Painting

CHAPTER FOUR

RESULTS AND DISCUSSION

  • 4.1 Costing
  • 4.2 Discussion

CHAPTER FIVE

CONCLUSION AND RECOMMENDATION

  • 5.1 Conclusion
  • 5.2 Recommendation

REFERENCES

APPENDIX A - "Letter of Transmittal"



ABSTRACT

Wheelbarrow can be defined as a machine that is used by labourers, farmers, gardeners, and others for transporting loads to heavy by hand it from one place to another. However, materials used for construction purpose are bought in standard sizes wither in long bars or standard sheet sizes. Moreover, depending on the type to be constructed, the materials are then reduced to smaller and more convenient sizes. The shapes and forms are changed by filing, drilling, reaming, tapping, broading etc. Also depending on the size of the workshop, some of these operations may be carried out using manual or mechanized processes. In addition, procedures involved in constructing a locally made “V” shape wheel barrow include MARKING OUT, PATTERN DEVELOPMENT, CUTTING, DRILLING, BORING and WELDING OPERATIONS. High quality materials were used to contruct the wheel barrow that processes the required standard. The medium was tested with some amount of local to know if its ability was optimum; the machine handle moved freely and smoothly after the handle was lifted.



Construction of Wheelbarrow


1.1 Introduction

This is a hand-pushed vehicle, consisting of a dish-shapes body supported on two shafts, arranged in a “V” shape with handles at the spread end and a wheel and axle at the point. The wheelbarrow at the axle, the serve applied at the handles and coal or resistance between the two in the body. It is used by laborers, farmers, gardeners and others for transporting loads too heavy or bucky to be carried by hand and is similar to hand trucks used by warehouse men and industrial workers expect that the latter has two wheels. Modern wheel barrows are made of wood or of a light metal, such as aluminum, and have a rubber fire on the wheel. A two-wheel vehicle for carrying garden materials is more properly called a garden cart.

The purpose of the production of this machine is to reduce alleviate and possibly eliminate the sufferings, time, money, wastage of man-power and more especially the need for technological break-through and self reliance, which has been a major concern of the federal government.

Moreover, this project at hand has delved into simplicities and the construction of this machine that can be used to carry different types of heavy load to any distance.


1.2 Origin and History

The wheelbarrow like any technology in the common place, was a story to tell. The west was very slow to invent the wheelbarrow. Do the earliest known European wheelbarrow gleams down from a stained glass windows in charless cathedral.

But the Chinese have had wheelbarrow for millennia. They celebrate a half-mythical inventor named K0 Yu. It is not know when he lived but since then, the Chinese have shaped wheelbarrows in enormous variety. They’ve used them for every kind of task.

It might help to consider just what an industrial wheelbarrow is. It also combines the advantages of both the wheel and the leveler. The load is centered behind a single wheel that way; you have to lift only a small part of the load. The two handles give an intimacy of control you don’t have with a four-wheeled cart. If you ever had to use a wheel barrow, you know it’s easy with the load in the right place. It can be back breaking when the load’s too far behind the wheel.

Chinese armies made the first use of the wheelbarrows. It give them such an advantage in moving goods that it was kept secret. Early Chinese writings talk about wheelbarrows in code. K0 Yu, one ancient text tells us built a “wooden goat” and rode away into the mountains on it. They called a wheelbarrow with handles in front a “wooden ox” one with handles at the back was a “glinding horse”

Long ago, the Chinese invented wheelbarrows with sails that were no idle experiment said – driven wheelbarrows became a well-developed and widespread technology. And the sails were prefect miniatures of the ones used in junk. 

And we, with all our vaunted technology, have yet to build wheelbarrows with the grace, balance, variety and features of these in China.

 It was not until the seventeenth century, when direct contact was made between European and China, as a result of trade, each area had it own distinct form of wheelbarrow, although by this time both were frequently modified to serve other needs than those for which they were designed.


1.3 Identification Offered

The purpose of the production of this machine is to reduce difficulties and probably eliminate the suffering time, money, cost of man-power and most especially the need for technological breakthrough and self-reliance which has been a major concern of the human being. Carrying of load on human head has been a tiring problem in the society from this commercial especially towards our loco-parenthesis.

It helps eradicate those problems; this project write up has been delivered into simplifications and the constructions of this machine that can be used in carrying different types of this machine that can be used in carrying different types of heavy objects to different areas.

Wheelbarrow is a machine that makes use of a bowel, made of metal used in carrying loads or is a simple machine that helps us life, pull, increase direction of heavy things change the direction of force and increase force.


1.4 Scope of Study

The studies focuses on the construction of wheelbarrow, the cost listings of procurement of the material for construction, marking out / centre punching, cutting and rolling, welding, and painting.


1.5 Limitations of the Study

During the course of this study, many things militated against its completion, some of which are:

  1. Time Constraint: The time frame given to accomplish this project was very short due to school academic calendar and it was carried out under pressure which made the researcher not to implement some necessary features.
  2. Establishment Policies: Establishment policies posed a serious limitation as most staffs are not ready to release information needed for this project work. There were lots of information needed from the staffs of this institution to enhance the study which took them time to release or they did not release at all for security purposes, hence the scope was reduced.

CHAPTER TWO

2.0 Literature Review

2.1 Introduction

This chapter focuses on the review of related literature. A literature review includes the current knowledge as well as theoretical and methodological contributions to a particular topic. It documents the state of the art with respect to the topic you are writing. It surveys the literature in the topic selected. In this research work the literature review includes the conceputal review, theoretical framework, the review of related literature …

Procedure for Accessing and Downloading the Complete Material in PDF or DOCX Format

Above is a preview excerpt of the full study on “Construction of Wheelbarrow”. The complete material, including all five chapters, is available for download upon request.


To obtain the complete research material content, simply place an order by paying the specified project or seminar fee using the account details or electronic payment (E-payment) system provided below.


Seminar Material
₦3,000
Project Material
₦5,000

For Mobile Money (MoMo) and Researchers Outside Nigeria, Kindly Request Complete Material via WhatsApp.


Account Details - For USSD / POS Transfer

ACCT NAMESPARKLYN SERVICES
Zenith Bank PLC1222599051
MoniePoint (MFB)8030511988
Paycom (OPay)8030511988

–– or ––



After payment, send message containing your payment receipt to Sparklyn Services with the phone number displayed below.


Once payment is confirmed, the complete document will be delivered via WhatsApp or email in Microsoft Word (MS-Word) format.




You can get more research topics on Chemical Engineering, if you did not see your preferred topic from the alternate list above.

Defense Procedure for Chemical Engineering Researchers


In preparation for defending a project or seminar on Construction of Wheelbarrow, it is imperative that as a nursing student, you demonstrate comprehensive knowledge of your research. The defense process is structured to include presenting your work, answering questions, and illustrating its pertinence. Initially, provide a succinct yet thorough introduction to your research topic, emphasizing its importance and the objectives, ensuring that both the audience and the External Examiner can understand the scope of your study.


Prior to your defense, be thoroughly acquainted with your research abstract and the critical elements of Chapter One, including motivation for embarking on this research, problem statement, objectives, and significance. In Chapter Two, be ready to cite at least two references from the literature review. For Chapter Three, you should be equipped to discuss the methodologies, tools, and techniques utilized. In Chapter Four, defend your research by justifying the findings and linking them to your research objectives.


Conclude your defense by succinctly summarizing the study and offering insightful, evidence-based recommendations. A professional dress code, such as wearing a suit and tie, is vital to create a favorable impression and elevate your presentation.


During the question and answer segment, the External Examiner may pose questions pertaining to your research. If confronted with a challenging or irrelevant question, respond diplomatically with, “Sorry, Sir/Madam, the question asked is beyond the scope of my study.” Whenever possible, direct your answers back to your research findings to reinforce your expertise.


Page Content Headings - Construction of Wheelbarrow

    Download Material (Docx)