× Close

📚 Departmental Seminar Topics and PDF (Docx) Materials for Google Scholars
Accounting Education Topics
Architecture Topics
Business Management Topics
Curriculum Studies Topics
English Education Topics
📚 Project or Seminar Related (2024) Subject Based Topics for Students

Search for Project and Seminar Topics Post Market Item or Services for Free
Design and Implementation of Wireless Batch Counting Device for Brewery

Design and Implementation of Wireless Batch Counting Device for Brewery

Project / Seminar Material
Reference ID: PS-5461-TM

DEDICATION

This research material titled “Design and Implementation of Wireless Batch Counting Device for Brewery” is dedicated to God for his enabling grace, and to all computer enthusiasts who contributed to make life a pleasant experience during my research documentation.

ACKNOWLEDGEMENT

I extend my sincere gratitude to all those who contributed to the completion of this project. Special thanks to my Supervisor (Name of your Supervisor), the Head of Department (Name of your HOD), the Lecturers in the department of Computer Science (CS), Book Authors and Profound Scholars of existing or related project material on “Design and Implementation of Wireless Batch Counting Device for Brewery” for their invaluable guidance, support, and expertise throughout the journey.

I am also grateful to your study area (mention any funding organizations, if applicable) for their financial assistance. This research would not have been possible without the encouragement and assistance of some stakeholders (mention any mentors, teachers, or colleagues). Additionally, I would like to acknowledge the understanding and patience of my family and friends during this endeavor. Your unwavering support has been a constant source of motivation. Thank you all for being part of this meaningful endeavor.

TABLE OF CONTENTS

PRELIMINARY PAGES


CHAPTER ONE

INTRODUCTION


    CHAPTER TWO

    LITERATURE REVIEW

    • 2.1 Introduction

    CHAPTER THREE

    SYSTEM ANALYSIS AND DESIGN

    • 3.1 Methodology Adopted
    • 3.1.1 Problem Identification Using SSADM
    • 3.2 Analysis of the Existing System
    • 3.2.1 Dataflow of the Existing System
    • 3.2.2 Disadvantages Of The Existing System
    • 3.2.3 Weakness of the existing System
    • 3.3 Feasibility Study
    • 3.3.1 Economic Feasibility
    • 3.3.2 Technical Feasibility
    • 3.3.3 Operational Feasibility
    • 3.4 Analysis of the Proposed System
    • 3.4.1 Data Flow Diagram of the Proposed System
    • 3.4.2 Advantages of the Proposed System
    • 3.4.3 Justification of the Proposed System
    • 3.5 Functional Requirements
    • 3.5.1 Use Case Diagram Of The Admin / User Privileges
    • 3.6 Data Requirements
    • 3.7 High Level Model of the Proposed System

    CHAPTER FOUR

    SYSTEM DESIGN AND IMPLEMENTATION

    • 4.1 Objectives of the Design
    • 4.2 Cohesion and Decomposition High level Model
    • 4.3 Control Center / Overall Dataflow Diagram
    • 4.3.1 Proposed System Operation Flowchart
    • 4.4 System Specification and Design
    • 4.4.1 Input and Output Specification
    • 4.4.2 Database Specification and Design
    • 4.4.3 Data Dictionary
    • 4.5 Choice and Justification of Programming Language
    • 4.6 Program Documentation
    • 4.7 Implementation Techniques
    • 4.7.1 System Testing
    • 4.8 Programming Module Specification
    • 4.8.1 Installation
    • 4.9 Computer Hardware Minimum Requirement
    • 4.10 Software Requirement
    • 4.11 Personnel / User Training
    • 4.12 File Maintenance Module

    CHAPTER FIVE

    SUMMARY, CONCLUSION AND RECOMMENDATION

    • 5.1 Introduction
    • 5.2 Summary
    • 5.3 Conclusion
    • 5.4 Recommendation

    REFERENCES

    APPENDIX A - “SOURCE CODE”

    APPENDIX B - “OBJECT PROGRAM”

    ABSTRACT

    This project deals on the design and implementation of Radio frequency RF based Wireless Batch Counting Device for Brewery capable of counting the bottled drinks /product in a conveyor and displays the value numerically and wireless to it receiver installed about 100meters away. It is realized in top-down methodology using passive and active components available in the local market. This electronic system is designed in two functional units, the transmitter and the receiver and they communicate by the principle of electrical resonance using Rf transmission wave band. The bottles are sensed using an opto-couple, transmitted to the receiver using Rf module and displayed using a 2-digit seven segment display. The system is packaged in a portable plastics casing, the result being a Rf based Wireless Batch Counting Device for Brewery. It is not micro program control and displays from 00-99 (one hundred counts).


    Design and Implementation of Wireless Batch Counting Device for Brewery

    CHAPTER ONE

    Radio frequency based wireless batch counting device for brewery


    1.1. Background of the Study

    Owing to the high rate of industrial espionage and theft, industrial security techniques need to be improved to arrest/combat pilfering in industries. This project work tries to bring in an improved security measure which can be used to check pilfering in Brewery industries. Pilfering of bottled drinks is a common theft in Breweries. And this act is perpetrated in the conveyor before a standalone counting device takes account of it. This has a tremendous effect on the stature of the fire − if it is not properly checked, could lead to liquidation and bankrupts of the firm.

    Conventionally, there is a batch counting device that counts the bottled drinks and displays the values numerically at same spot carrier criminals who pilfer the products divert it before the counter. This chronology in social vices in the brewery industry has motivated me to embark on a project that is capable of counting/the bottled drinks in the capable of counting/the bottled drinks in the conveyor and display the value numerical and wirelessly (using Rf transmission waveband) to its receiver installed about 100m away. This device will count the product before it gets to the standalone version. This technique will help to check pilfering and bring industrial espionage to halt.


    1.2. Problem Statement

    Brewery industries all over world face the problem of pilfering of the products by the workers most frequently in the conveyer. This menace gave way to the development of a stand alone batch counting device which is usually installed in the conveyors to record the total number of bottled products. This techniques is facing serious threat since the bad-eggs pilfer/divert the products before it gets to the counter.

    Owing to the challenges mentioned above, there is need to develop a system which will be installed at the entry point of the conveyors to count the products without the consent of the workers and display the value to a receivers unit installed in the manager office using Radio-frequency technology.


    1.3. Aims and Objectives

    The aim of this project is to design and implement a Radio frequency based wireless batch counter capable of counting bottled drinks/products and display it at a remote location.

    1. To develop system which can communicate using Radio frequency technology.
    2. To develop an opto coupler module which can detect opaque objects like bottle using laser diode and visible light
    3. To develop a 2-digit decimal counting unit which can count from 00-99.
    4. To develop a system

    CHAPTER TWO

    2.0 Literature Review

    2.1 Introduction

    This chapter focuses on the review of related literature. A literature review includes the current knowledge as well as theoretical and methodological contributions to a particular topic. It documents the state of the art with respect to the topic you are writing. It surveys the literature in the topic selected. In this research work the literature review includes the …

    Summary Headlines for Design and Implementation of Wireless Batch Counting Device for Brewery



      NEED HELP? CALL US 24/7:
      +234 803 051 1988